Bed harvester BRB
This bed harvester is suitable for harvesting seedlings.
Operating procedure
The tractor's lifting device is used to set the height. The soil and plants enter the screening belt via the movable blade. This sieving belt rotates upwards at the same speed as the driving speed to hold the bed together. Vibrators under the sieving belt loosen the bed. At the rear of the harvester, the plants are picked up manually and put into boxes. At the top is a box platform for the empty boxes.
The planter includes a steerable wheel axle for sharp headland manoeuvring. The whole unit is controlled via a push-button box in the tractor.
General specifications
| Sieve belt length | 5500 mm |
| Capacity | 500 metres per hour |
Optional
- 3-point jack with K80 ball
- Left-right pivoting drawbar
- Coulter discs
- Cameras
- Work lamps
- Canopy
Common configurations
BRB\E135
| Rodebreite | 1350 mm |
| Tyres | 11.5/80-15.3 |
| Track width | 1600 mm |
| Linkage | K80 ball |
| Weight | 2200 kg |
| Power requirement | 80 hp |
| Hydraulics | 1 (single-acting) pilot valve + return, 20 l/min & 1 (single-acting) pilot valve + return, 40 l/min |
| Electrical connection | 3-pin 12 VDC connector (ISO 12369) & 7-pin lighting plug (ISO 1724) |
BRB\E110
Working width1100 mm
| Tyres | 11.5/80-15.3 |
| Track width | 1600 mm |
| Linkage | K80 ball |
| Weight | 2700 kg |
| Power requirement | 80 hp |
| Hydraulics | 1 (single-acting) pilot valve + return, 20 l/min & 1 (single-acting) pilot valve + return, 40 l/min |
| Electrical connection | 3-pin 12 VDC connector (ISO 12369) & 7-pin lighting plug (ISO 1724) |
