Plant harvester BRP\F250

Plant harvester BRP\F250

This plant lifter is suitable for lifting strawberry plants, asparagus plants, perennials and certain types of nursery plants.

Operating procedure

The height-adjustable drawbar is used to determine the harvesting depth. The soil and plants enter the short pinned sieve belt via the vibrating knife. The speed of this pinned sieve belt is linked to the driving speed, so the soil with plants remains contiguous. At the end of the short pinned belt, the plants fall onto the long pinned sieve belt thus separating the plants from the soil. The plants will be transported upwards to the sieve belt. This sieve belt contains 3 rockers to shake the last soil out of the plants. The plants are transported by means of a side discharge conveyor at the back onto the neighbouring trailer. The side discharge conveyor contains a kink in the middle and a diverter valve at the end. With the kink and diverter valve, all corners of the trailer can be filled.
The planter includes a steerable wheel axle for sharp headland manoeuvring. The whole unit is controlled via a display in the tractor.

General specifications

Short pinned belt length1500 mm
Length long pinned belt3000 mm
Sieve belt length4300 mm
Width of side discharge belt800 mm
Passage under side discharge belt3,2 m
Capacity500 to 2500 metres per hour

Optional

  • Left-right pivoting drawbar
  • Rotor distributor above the pin belt
  • Automatic depth control
  • Leveling
  • Joystick with (main) cylinder functions
  • Pressure wheels or driven pressure wheels
  • Cameras
  • Work lamps

Common configurations

BRP\250B150

Rodebreite1500 mm
Tyres380/90R46
Track width1600 mm
LinkageK80 ball
Weight8500 kg
Power requirement140 hp
PTO shaft1000 rpm
Hydraulics1x load sensing, press + free return, min. 20 l/min
Electrical connectionISO bus connector (ISO 11783) &
7-pin lighting plug (ISO 1724)

BRP\250B180

Rodebreite1800 mm
Tyres380/90R46
Track width1800 mm
LinkageK80 ball
Weight8500 kg
Power requirement160 hp
PTO shaft1000 rpm
Hydraulics1x load sensing, press + free return, min. 20 l/min
Electrical connectionISO bus connector (ISO 11783) &
7-pin lighting plug (ISO 1724)